ARMWARE RFC Archive <- RFC Index (9101..9200)

RFC 9167




Internet Engineering Task Force (IETF)                        T. Sattler
Request for Comments: 9167                                              
Category: Standards Track                                      R. Carney
ISSN: 2070-1721                                                J. Kolker
                                                            GoDaddy Inc.
                                                           December 2021

   Registry Maintenance Notification for the Extensible Provisioning
                             Protocol (EPP)

Abstract

   This document describes an Extensible Provisioning Protocol (EPP)
   extension called "Registry Maintenance Notification", which is used
   by EPP servers to notify EPP clients and allow EPP clients to query
   EPP servers regarding maintenance events.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 7841.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   https://www.rfc-editor.org/info/rfc9167.

Copyright Notice

   Copyright (c) 2021 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Revised BSD License text as described in Section 4.e of the
   Trust Legal Provisions and are provided without warranty as described
   in the Revised BSD License.

Table of Contents

   1.  Introduction
     1.1.  Terminology and Definitions
   2.  Migrating to Newer Versions of This Extension
   3.  Object Attributes
     3.1.  Internationalized Domain Names
     3.2.  Dates and Times
     3.3.  Maintenance Elements
   4.  EPP Command Mapping
     4.1.  EPP Query Commands
       4.1.1.  EPP <info> Command
       4.1.2.  EPP <poll> Command
     4.2.  EPP Transform Commands
   5.  Formal Syntax
     5.1.  Registry Maintenance Notification EPP Mapping Schema
   6.  IANA Considerations
     6.1.  XML Namespace
     6.2.  EPP Extension Registry
   7.  Security Considerations
   8.  References
     8.1.  Normative References
     8.2.  Informative References
   Acknowledgments
   Authors' Addresses

1.  Introduction

   The Extensible Provisioning Protocol (EPP), as defined in [RFC5730],
   is a protocol whose original motivation is to provide a standard
   Internet domain name registration protocol for use between registries
   and registrars.

   Registries routinely update systems to ensure a higher quality of
   service, implement new services, or upgrade protocols to the latest
   standards.  These updates are pushed to various registry environments
   during time frames communicated to registrars as "maintenance
   events".  Maintenance events may require making services unavailable
   for some limited time while the upgrade happens.  Registries usually
   inform registrars about maintenance events in various formats, none
   of which are standardized between registries.

   The DNS namespace expansion has led to many additional registries
   that registrars must interact with, adding more maintenance events
   and formats.  It is now desirable to provide an efficient approach to
   notify registrars.

   This document describes an extension mapping for version 1.0 of the
   EPP to provide a mechanism by which EPP servers may notify EPP
   clients of and allow EPP clients to query EPP servers on upcoming
   maintenance events.

1.1.  Terminology and Definitions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in
   BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   XML [W3C.REC-xml-20081126] is case sensitive.  Unless stated
   otherwise, XML specifications and examples provided in this document
   MUST be interpreted in the character case presented in order to
   develop a conforming implementation.

   The XML namespace prefix "maint" is used for the namespace
   "urn:ietf:params:xml:ns:epp:maintenance-1.0", but implementations
   MUST NOT depend on it and instead employ a proper namespace-aware XML
   parser and serializer to interpret and output the XML documents.

   "ote" is an abbreviation for "Operational Test and Evaluation".

   In examples, "C:" represents lines sent by a protocol client, and
   "S:" represents lines returned by a protocol server.  Indentation and
   white space in examples are provided only to illustrate element
   relationships and are not a required feature of this protocol.

2.  Migrating to Newer Versions of This Extension

   Servers that implement this extension SHOULD provide a way for
   clients to progressively update their implementations when a new
   version of the extension is deployed.  A newer version of the
   extension is expected to use an XML namespace with a higher version
   number than the prior versions.

   Servers SHOULD (for a temporary migration period up to server policy)
   provide support for older versions of the extension in parallel to
   the newest version and allow clients to execute their preferred
   version of the <info> command based on the maintenance <objURI>
   elements of the server <greeting>.  The version of the maintenance
   <info> response MUST match the version of the maintenance <info>
   command executed by the server.

   Servers MUST return a Registry Maintenance Notification poll message
   matching the newest negotiated version of the maintenance extension,
   based on an intersection of the maintenance <objURI> elements in the
   server <greeting> and the client <login> command.  If the
   intersection of the maintenance <objURI> elements of the server
   <greeting> and the client <login> command results in an empty set,
   the server MUST return the newest version of the Registry Maintenance
   Notification poll message supported by the server based on "Usage
   with Poll-Message EPP Responses" in Section 6 of [RFC9038].

3.  Object Attributes

3.1.  Internationalized Domain Names

   Names of affected hosts MUST be provided in A-label form, according
   to [RFC5891].

3.2.  Dates and Times

   All date and time attribute values MUST be expressed in Universal
   Coordinated Time (UTC) using the Gregorian calendar.  The date-time
   format defined as "date-time" in [RFC3339], with time-offset="Z",
   MUST be used.

3.3.  Maintenance Elements

   The <maint:item> element describes a single registry maintenance
   event during a specific period.  This element is used in a
   maintenance item EPP <info> command and response as well as in a
   <poll> response.

   If an element is not marked as optional, it is mandatory.

   <maint:id>
      The server-unique identifier for the maintenance event with the
      OPTIONAL "name" attribute that includes a human-readable name of
      the event.  The server-unique identifier SHALL NOT be changed if
      the event is updated or deleted.  When the "name" attribute is
      set, the OPTIONAL "lang" attribute, per the language structure in
      [RFC5646], MAY be present to identify the language if the
      negotiated value is something other than the default value of "en"
      (English).

   <maint:type>
      Zero or more OPTIONAL types of the maintenance event, with the
      possible set of values defined by server policy, such as "Routine
      Maintenance", "Software Update", "Software Upgrade", or "Extended
      Outage".  The OPTIONAL "lang" attribute MAY be present to identify
      the language if the negotiated value is something other than the
      default value of "en" (English).

   <maint:pollType>
      The OPTIONAL <maint:pollType> element for a Registry Maintenance
      Notification poll message; values MUST be "create", "update",
      "delete", "courtesy", or "end".  For the "create" and "update"
      types, the server includes the state of the maintenance event
      after the creation or update.  For the "delete" type, the server
      includes the state of the event before the delete.  The "courtesy"
      provides a reminder of an event, and the "end" provides a
      notification of the end of the event without updating the
      maintenance object and includes the latest state of the event.
      This element MUST be present only for poll messages.

   <maint:systems>
      One or more <maint:system> elements that are affected by the
      maintenance event.

      <maint:system>
         The <maint:system> element contains the following child
         elements:

         <maint:name>
            The name of the affected system, such as "EPP", "WHOIS",
            "DNS", "Portal", "RDAP", etc.

         <maint:host>
            The OPTIONAL affected maintained system's hostname, which
            SHALL be in A-label form, according to [RFC5891].

         <maint:impact>
            The impact level; the values MUST be "full", "partial", or
            "none".  If access is expected to be intermittently
            unavailable, it is "partial".  If access is expected to be
            completely unavailable, it is "full".  If access is not
            affected, it is "none".

   <maint:environment>
      The type of the affected system; the attribute "type" is REQUIRED
      and MUST be "production", "ote", "staging", "dev", or "custom".
      For extensibility, the <maint:environment> element includes the
      OPTIONAL "name" attribute that can define the name of the custom
      environment when the <maint:environment> element "type" attribute
      has the "custom" value.  For example, for the custom "marketing"
      environment, the <maint:environment> element should be:
      <maint:environment type="custom" name="marketing"/>.

   <maint:start>
      The date and time of the start of the maintenance event.

   <maint:end>
      The date and time of the end of the maintenance event.  The
      <maint:end> element MUST be greater than the <maint:start>
      element.

   <maint:reason>
      The reason behind the maintenance event; the values MUST be either
      "planned" or "emergency".

   <maint:detail>
      The OPTIONAL URI to the detailed maintenance event description,
      formatted according to [RFC3986].

   <maint:description>
      Zero or more OPTIONAL free-form descriptions of the maintenance
      event, usable without creating and traversing an external resource
      as defined by the <maint:detail> element.  The OPTIONAL "lang"
      attribute MAY be present to identify the language if the
      negotiated value is something other than the default value of "en"
      (English).  The OPTIONAL "type" attribute MAY be present to
      identify the format of the description.  It MUST be either "plain"
      for plain text or "html" for HTML text, as defined in [HTML5], and
      XML-escaped, with a default value of "plain".

   <maint:tlds>
      The OPTIONAL <maint:tlds> element contains one or more <maint:tld>
      child elements.  If the <maint:tlds> is not present, the entire
      system is affected.

      <maint:tld>
         The affected top-level domain or registry zone, which SHALL be
         in A-label form, according to [RFC5891].

  
      <maint:intervention>
         The OPTIONAL <maint:intervention> element contains the
         following child elements:

         <maint:connection>
            The value SHALL be boolean and indicates if a client needs
            to perform a connection-related action such as a reconnect.
            The attribute should only be used as a flag to indicate
            connections will be affected.  Servers SHOULD include a
            description of how the connections are affected in the
            <maint:description> element or use the <maint:detail>
            element above.

         <maint:implementation>
            The value SHALL be boolean and indicates if a client needs
            to perform an implementation-related action such as a code
            change.  The attribute should only be used as a flag to
            indicate implementation will be affected.  Servers SHOULD
            include a description of how the implementation is affected
            in the <maint:description> element or use the <maint:detail>
            element above.

      <maint:crDate>
         The date and time of the maintenance object creation.

      <maint:upDate>
         The OPTIONAL date and time of the most recent maintenance
         object modification.  This element MUST NOT be present if the
         maintenance object has never been modified.

4.  EPP Command Mapping

   A detailed description of the EPP syntax and semantics can be found
   in the EPP core protocol specification [RFC5730].  The command
   mappings described here are specifically used to notify registrars of
   registry maintenance events and object mapping.

4.1.  EPP Query Commands

   EPP [RFC5730] provides three commands to retrieve object information:
   <check> to determine if an object is known to the server, <info> to
   retrieve detailed information associated with an object, and
   <transfer> to retrieve object transfer status information.

   This extension does not add any elements to EPP <check> and
   <transfer> commands or responses.

4.1.1.  EPP <info> Command

   EPP provides the <info> command that is used to retrieve registry
   maintenance information.  In addition to the standard EPP command
   elements, the <info> command MUST contain a <maint:info> element that
   identifies the maintenance namespace.

   The <maint:info> element MUST contain a child element.  It is either
   the <maint:id> child element, described in Section 4.1.1.1, to query
   for a specific maintenance item or the <maint:list> child element,
   described in Section 4.1.1.2, to query all maintenance items.

4.1.1.1.  Info Maintenance Item

   The information regarding a specific maintenance item can be
   retrieved by using the <info> command with the <maint:info> element
   and the <maint:id> child element, defined in Section 3.3.  If the
   maintenance identifier does not exist, the server MUST return an EPP
   error result code of 2303 ("Object does not exist") [RFC5730].

   The following is an example of retrieving a specific maintenance item
   in an <info> command.

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <info>
   C:      <maint:info
   C:        xmlns:maint="urn:ietf:params:xml:ns:epp:maintenance-1.0">
   C:        <maint:id>2e6df9b0-4092-4491-bcc8-9fb2166dcee6</maint:id>
   C:      </maint:info>
   C:    </info>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When an <info> command has been processed successfully, the EPP
   <resData> element MUST contain a child <maint:infData> element that
   identifies the maintenance namespace.  The <maint:infData> element
   contains the <maint:item> element defined in Section 3.3.

   The following is an example of returning a specific maintenance item
   in an <info> response.

   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:   <response>
   S:      <result code="1000">
   S:         <msg>Command completed successfully</msg>
   S:      </result>
   S:      <resData>
   S:        <maint:infData
   S:          xmlns:maint="urn:ietf:params:xml:ns:epp:maintenance-1.0">
   S:          <maint:item>
   S:            <maint:id>2e6df9b0-4092-4491-bcc8-9fb2166dcee6
   S:            </maint:id>
   S:            <maint:type lang="en">Routine Maintenance</maint:type>
   S:            <maint:systems>
   S:              <maint:system>
   S:                <maint:name>EPP</maint:name>
   S:                <maint:host>epp.registry.example
   S:                </maint:host>
   S:                <maint:impact>full</maint:impact>
   S:              </maint:system>
   S:            </maint:systems>
   S:            <maint:environment type="production"/>
   S:            <maint:start>2021-12-30T06:00:00Z</maint:start>
   S:            <maint:end>2021-12-30T07:00:00Z</maint:end>
   S:            <maint:reason>planned</maint:reason>
   S:            <maint:detail>
   S:              https://www.registry.example/notice?123
   S:            </maint:detail>
   S:            <maint:description lang="en">free-text
   S:            </maint:description>
   S:            <maint:description lang="de">Freitext
   S:            </maint:description>
   S:            <maint:tlds>
   S:              <maint:tld>example</maint:tld>
   S:              <maint:tld>test</maint:tld>
   S:            </maint:tlds>
   S:            <maint:intervention>
   S:              <maint:connection>false</maint:connection>
   S:              <maint:implementation>false</maint:implementation>
   S:            </maint:intervention>
   S:            <maint:crDate>2021-11-08T22:10:00Z</maint:crDate>
   S:          </maint:item>
   S:        </maint:infData>
   S:      </resData>
   S:      <trID>
   S:         <clTRID>ABC-12345</clTRID>
   S:         <svTRID>54321-XYZ</svTRID>
   S:      </trID>
   S:   </response>
   S:</epp>

4.1.1.2.  Info Maintenance List

   The information for a list of maintenance items can be retrieved by
   using the <info> command with the <maint:info> element and the empty
   <maint:list> child element.  Server policy determines if completed
   maintenance events will be included in the list of maintenance items.

   The following is an example of retrieving the list of maintenance
   items in an <info> command.

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <info>
   C:      <maint:info
   C:        xmlns:maint="urn:ietf:params:xml:ns:epp:maintenance-1.0">
   C:        <maint:list/>
   C:      </maint:info>
   C:    </info>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When an <info> command has been processed successfully, the EPP
   <resData> element MUST contain a child <maint:infData> element that
   identifies the maintenance namespace.  The <maint:infData> element
   contains the <maint:list> element with zero or more <maint:listItem>
   child elements.  The <maint:listItem> element contains the following
   child elements:

      <maint:id>
         The <maint:id> element defined in Section 3.3.

      <maint:start>
         The <maint:start> element defined in Section 3.3.

      <maint:end>
         The <maint:end> element defined in Section 3.3.

      <maint:crDate>
         The <maint:crDate> element defined in Section 3.3.

      <maint:upDate>
         The OPTIONAL <maint:upDate> element defined in Section 3.3.

   The following is an example of returning the list of maintenance
   items in an <info> response.

   S:<?xml version="1.0" encoding="UTF-8"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:   <response>
   S:      <result code="1000">
   S:         <msg>Command completed successfully</msg>
   S:      </result>
   S:      <resData>
   S:        <maint:infData
   S:          xmlns:maint="urn:ietf:params:xml:ns:epp:maintenance-1.0">
   S:          <maint:list>
   S:            <maint:listItem>
   S:              <maint:id>2e6df9b0-4092-4491-bcc8-9fb2166dcee6
   S:              </maint:id>
   S:              <maint:start>2021-12-30T06:00:00Z</maint:start>
   S:              <maint:end>2021-12-30T07:00:00Z</maint:end>
   S:              <maint:crDate>2021-11-08T22:10:00Z</maint:crDate>
   S:            </maint:listItem>
   S:            <maint:listItem>
   S:              <maint:id>91e9dabf-c4e9-4c19-a56c-78e3e89c2e2f
   S:              </maint:id>
   S:              <maint:start>2021-12-15T04:30:00Z</maint:start>
   S:              <maint:end>2021-12-15T05:30:00Z</maint:end>
   S:              <maint:crDate>2021-11-08T22:11:00Z</maint:crDate>
   S:              <maint:upDate>2021-11-17T15:00:00Z</maint:upDate>
   S:            </maint:listItem>
   S:          </maint:list>
   S:        </maint:infData>
   S:      </resData>
   S:      <trID>
   S:         <clTRID>ABC-12345</clTRID>
   S:         <svTRID>54321-XYZ</svTRID>
   S:      </trID>
   S:   </response>
   S:</epp>

4.1.2.  EPP <poll> Command

   The EPP <poll> command and response are defined in Section 2.9.2.3 of
   [RFC5730].  The Registry Maintenance Notification is included in the
   EPP <poll> response in [RFC5730].

   There are five types of poll messages for the Registry Maintenance
   Notification, defined by the <maint:pollType> element in Section 3.3.
   A poll message might be generated when a maintenance event is
   created, updated, or deleted.  A courtesy poll message can be sent as
   a reminder of an upcoming maintenance event.  An end poll message can
   be sent when the maintenance event is completed.  In the case of a
   message specific to Registry Maintenance, a <maint:infData> element
   that identifies the maintenance namespace will be included within the
   <resData> element of the standard <poll> response.  The
   <maint:infData> element contains the <maint:item> element defined in
   Section 3.3.

   The following is an example of a <poll> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <poll op="req"/>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   Example <poll> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1301">
   S:      <msg>Command completed successfully; ack to dequeue</msg>
   S:    </result>
   S:  <msgQ count="1" id="12345">
   S:    <qDate>2021-11-08T22:10:00Z</qDate>
   S:    <msg lang="en">Registry Maintenance Notification</msg>
   S:  </msgQ>
   S:  <resData>
   S:    <maint:infData
   S:      xmlns:maint="urn:ietf:params:xml:ns:epp:maintenance-1.0">
   S:      <maint:item>
   S:        <maint:id>2e6df9b0-4092-4491-bcc8-9fb2166dcee6</maint:id>
   S:        <maint:pollType>create</maint:pollType>
   S:        <maint:systems>
   S:          <maint:system>
   S:            <maint:name>EPP</maint:name>
   S:            <maint:host>epp.registry.example
   S:            </maint:host>
   S:            <maint:impact>full</maint:impact>
   S:          </maint:system>
   S:        </maint:systems>
   S:        <maint:environment type="production"/>
   S:        <maint:start>2021-12-30T06:00:00Z</maint:start>
   S:        <maint:end>2021-12-30T07:00:00Z</maint:end>
   S:        <maint:reason>planned</maint:reason>
   S:        <maint:detail>
   S:          https://www.registry.example/notice?123
   S:        </maint:detail>
   S:        <maint:tlds>
   S:          <maint:tld>example</maint:tld>
   S:          <maint:tld>test</maint:tld>
   S:        </maint:tlds>
   S:        <maint:intervention>
   S:          <maint:connection>false</maint:connection>
   S:          <maint:implementation>false</maint:implementation>
   S:        </maint:intervention>
   S:        <maint:crDate>2021-11-08T22:10:00Z</maint:crDate>
   S:      </maint:item>
   S:    </maint:infData>
   S:  </resData>
   S:  <trID>
   S:    <clTRID>ABC-12345</clTRID>
   S:    <svTRID>54321-XYZ</svTRID>
   S:  </trID>
   S:  </response>
   S:</epp>

4.2.  EPP Transform Commands

   EPP provides five commands to transform objects: <create> to create
   an instance of an object, <delete> to delete an instance of an
   object, <renew> to extend the validity period of an object,
   <transfer> to manage object sponsorship changes, and <update> to
   change information associated with an object.

   This extension does not add any elements to the EPP <create>,
   <delete>, <renew>, <transfer>, and <update> commands.

5.  Formal Syntax

   The EPP Registry Maintenance Notification schema is presented here.

   The formal syntax is a complete schema representation of the object
   mapping suitable for automated validation of EPP XML instances.  The
   <CODE BEGINS> and <CODE ENDS> tags are not part of the schema; they
   are used to note the beginning and end of the schema for URI
   registration purposes.

5.1.  Registry Maintenance Notification EPP Mapping Schema

   <CODE BEGINS>
   <?xml version="1.0" encoding="UTF-8"?>
     <schema targetNamespace="urn:ietf:params:xml:ns:epp:
       maintenance-1.0"
       xmlns:eppcom="urn:ietf:params:xml:ns:eppcom-1.0"
       xmlns:epp="urn:ietf:params:xml:ns:epp-1.0"
       xmlns:maint="urn:ietf:params:xml:ns:epp:maintenance-1.0"
       xmlns="https://www.w3.org/2001/XMLSchema"
       elementFormDefault="qualified">
     <!--
     Import common element types
     -->
     <import namespace="urn:ietf:params:xml:ns:eppcom-1.0"/>
     <import namespace="urn:ietf:params:xml:ns:epp-1.0"/>
     <annotation>
       <documentation>
         Extensible Provisioning Protocol v1.0
         Registry Maintenance Notification Mapping Schema.
       </documentation>
     </annotation>
     <!--
     Child elements found in EPP commands.
     -->
     <element name="info" type="maint:infoType"/>
     <!--
      Child elements of the <info> command.
     -->
     <complexType name="infoType">
       <sequence>
         <choice>
           <element name="list"/>
           <element name="id" type="maint:idType"/>
         </choice>
       </sequence>
     </complexType>
     <!--
     Human-readable text may describe the maintenance
     -->
     <complexType name="idType">
       <simpleContent>
         <extension base="token">
           <attribute name="name" type="token"/>
           <attribute name="lang" type="language" default="en"/>
         </extension>
       </simpleContent>
     </complexType>
     <!--
      Info Response element
     -->
     <element name="infData" type="maint:infDataType"/>
     <!--
      <info> response elements.
     -->
     <complexType name="infDataType">
       <choice>
         <element name="list" type="maint:listDataType"/>
         <element name="item" type="maint:maintDataType"/>
       </choice>
     </complexType>
     <!--
      Attributes associated with the list info response
     -->
     <complexType name="listDataType">
       <sequence>
         <element name="listItem" type="maint:maintItemType"
          minOccurs="0" maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <!--
      Attributes associated with the list item info response
     -->
     <complexType name="maintItemType">
       <sequence>
         <element name="id" type="maint:idType"/>
         <element name="start" type="dateTime"/>
         <element name="end" type="dateTime"/>
         <element name="crDate" type="dateTime"/>
         <element name="upDate" type="dateTime" minOccurs="0"/>
       </sequence>
     </complexType>
     <!--
      Attributes associated with the maintenance info response
     -->
     <complexType name="maintDataType">
       <sequence>
         <element name="id" type="maint:idType"/>
         <element name="type" type="maint:typeType" minOccurs="0"
          maxOccurs="unbounded"/>
         <element name="pollType" type="maint:pollType" minOccurs="0"/>
         <element name="systems" type="maint:systemsType"/>
         <element name="environment" type="maint:envType"/>
         <element name="start" type="dateTime"/>
         <element name="end" type="dateTime"/>
         <element name="reason" type="maint:reasonEnum"/>
         <element name="detail" type="anyURI" minOccurs="0"/>
         <element name="description" type="maint:descriptionType"
          minOccurs="0" maxOccurs="unbounded"/>
         <element name="tlds" type="maint:tldsType" minOccurs="0"/>
         <element name="intervention" type="maint:interventionType"
          minOccurs="0"/>
         <element name="crDate" type="dateTime"/>
         <element name="upDate" type="dateTime" minOccurs="0"/>
       </sequence>
     </complexType>
     <!--
      systems element
     -->
     <complexType name="systemsType">
       <sequence>
         <element name="system" type="maint:systemType"
          maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <!--
      Enumerated list of poll types
     -->
     <simpleType name="pollType">
       <restriction base="token">
         <enumeration value="create"/>
         <enumeration value="update"/>
         <enumeration value="delete"/>
         <enumeration value="courtesy"/>
         <enumeration value="end"/>
       </restriction>
     </simpleType>
     <!--
      Enumerated list of impacts
     -->
     <simpleType name="impactEnum">
       <restriction base="token">
         <enumeration value="none"/>
         <enumeration value="partial"/>
         <enumeration value="full"/>
       </restriction>
     </simpleType>
     <!--
      description element
     -->
     <complexType name="descriptionType">
       <simpleContent>
         <extension base="string">
           <attribute name="lang" type="language" default="en"/>
           <attribute name="type" type="maint:descEnum" default="plain"
           />
         </extension>
       </simpleContent>
     </complexType>
     <!--
      Enumerated list of description mime types
     -->
     <simpleType name="descEnum">
       <restriction base="token">
         <enumeration value="plain"/>
         <enumeration value="html"/>
       </restriction>
     </simpleType>
     <!--
      type element
     -->
     <complexType name="typeType">
       <simpleContent>
         <extension base="string">
           <attribute name="lang" type="language" default="en"/>
         </extension>
       </simpleContent>
     </complexType>
     <!--
      system element
     -->
     <complexType name="systemType">
       <sequence>
         <element name="name" type="token"/>
         <element name="host" type="eppcom:labelType" minOccurs="0"/>
         <element name="impact" type="maint:impactEnum"/>
       </sequence>
     </complexType>
     <!--
      Enumerated list of environments
     -->
     <simpleType name="envEnum">
       <restriction base="token">
         <enumeration value="production"/>
         <enumeration value="ote"/>
         <enumeration value="staging"/>
         <enumeration value="dev"/>
         <enumeration value="custom"/>
       </restriction>
     </simpleType>
     <!--
      environment element
     -->
     <complexType name="envType">
       <simpleContent>
         <extension base="token">
           <attribute name="type" type="maint:envEnum" use="required"/>
           <attribute name="name" type="token" use="optional"/>
         </extension>
       </simpleContent>
     </complexType>
     <!--
      Enumerated list of reasons
     -->
     <simpleType name="reasonEnum">
       <restriction base="token">
         <enumeration value="planned"/>
         <enumeration value="emergency"/>
       </restriction>
     </simpleType>
     <!--
      tlds element
     -->
     <complexType name="tldsType">
       <sequence>
         <element name="tld" type="eppcom:labelType"
          maxOccurs="unbounded"/>
       </sequence>
     </complexType>
     <!--
      intervention element
     -->
     <complexType name="interventionType">
       <sequence>
         <element name="connection" type="boolean"/>
         <element name="implementation" type="boolean"/>
       </sequence>
     </complexType>
     <!--
      End of schema.
     -->
     </schema>
   <CODE ENDS>

6.  IANA Considerations

6.1.  XML Namespace

   This document uses URNs to describe XML namespaces and XML schemas
   conforming to a registry mechanism defined in [RFC3688].

   The following entry has been registered as an XML namespace:

   URI:  urn:ietf:params:xml:ns:epp:maintenance-1.0
   Registrant Contact:  IESG
   XML:  None.  Namespace URIs do not represent an XML specification.

   The following entry has been registered to the XML maintenance
   schema:

   URI:  urn:ietf:params:xml:schema:epp:maintenance-1.0
   Registrant Contact:  IESG
   XML:  See the "Formal Syntax" section of this document.

6.2.  EPP Extension Registry

   The following entry has been added to the "Extensions for the
   Extensible Provisioning Protocol (EPP)" registry, described in
   [RFC7451]:

   Name of Extension:  Registry Maintenance Notification for the
      Extensible Provisioning Protocol (EPP)
   Document status:  Standards Track
   Reference:  RFC 9167
   Registrant Name and Email Address:  IESG <iesg@ietf.org>
   TLDs:  Any
   IPR Disclosure:  None
   Status:  Active
   Notes:  None

7.  Security Considerations

   The security considerations of [RFC5730] apply in this document.
   Additionally, a server MUST only provide maintenance information to
   clients that are authorized.  Suppose a client queries a maintenance
   identifier that it is not authorized to access per Section 4.1.1.1,
   "Info Maintenance Item".  In that case, the server SHOULD return an
   EPP error result code of 2201 ("Authorization error") or 2303
   ("Object does not exist") [RFC5730].  The list of top-level domains
   or registry zones returned in the "Info Maintenance Item" response
   SHOULD be filtered based on the top-level domains or registry zones
   for which the client is authorized.  Authorization of poll messages
   is done at the time of poll message insertion and not at the time of
   poll message consumption.

8.  References

8.1.  Normative References

   [HTML5]    WHATWG, "HTML - Living Standard", December 2021,
              <https://html.spec.whatwg.org/multipage/>.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3339]  Klyne, G. and C. Newman, "Date and Time on the Internet:
              Timestamps", RFC 3339, DOI 10.17487/RFC3339, July 2002,
              <https://www.rfc-editor.org/info/rfc3339>.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, DOI 10.17487/RFC3986, January 2005,
              <https://www.rfc-editor.org/info/rfc3986>.

   [RFC5646]  Phillips, A., Ed. and M. Davis, Ed., "Tags for Identifying
              Languages", BCP 47, RFC 5646, DOI 10.17487/RFC5646,
              September 2009, <https://www.rfc-editor.org/info/rfc5646>.

   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
              <https://www.rfc-editor.org/info/rfc5730>.

   [RFC5891]  Klensin, J., "Internationalized Domain Names in
              Applications (IDNA): Protocol", RFC 5891,
              DOI 10.17487/RFC5891, August 2010,
              <https://www.rfc-editor.org/info/rfc5891>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

   [RFC9038]  Gould, J. and M. Casanova, "Extensible Provisioning
              Protocol (EPP) Unhandled Namespaces", RFC 9038,
              DOI 10.17487/RFC9038, May 2021,
              <https://www.rfc-editor.org/info/rfc9038>.

   [W3C.REC-xml-20081126]
              Bray, T., Paoli, J., Sperberg-McQueen, M., Maler, E., and
              F. Yergeau, "Extensible Markup Language (XML) 1.0 (Fifth
              Edition)", World Wide Web Consortium Recommendation REC-
              xml-20081126, November 2008,
              <https://www.w3.org/TR/2008/REC-xml-20081126>.

8.2.  Informative References

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC7451]  Hollenbeck, S., "Extension Registry for the Extensible
              Provisioning Protocol", RFC 7451, DOI 10.17487/RFC7451,
              February 2015, <https://www.rfc-editor.org/info/rfc7451>.

Acknowledgments

   The authors wish to thank the following persons for their feedback
   and suggestions: James Gould, Michael Bauland, Patrick Mevzek, Quoc-
   Anh Pham, Raymond Zylstra, Christopher Martens, Anthony Eden, Neal
   McPherson, Craig Marchant, and Andreas Huber.

Authors' Addresses

   Tobias Sattler

   Email: mail@tobiassattler.com
   URI:   https://tobiassattler.com

   Roger Carney
   GoDaddy Inc.
   2155 E GoDaddy Way
   Tempe, AZ 85284
   United States of America

   Email: rcarney@godaddy.com
   URI:   https://www.godaddy.com

   Jody Kolker
   GoDaddy Inc.
   2155 E GoDaddy Way
   Tempe, AZ 85284
   United States of America

   Email: jkolker@godaddy.com
   URI:   https://www.godaddy.com