ARMWARE RFC Archive <- RFC Index (4101..4200)

RFC 4114


Network Working Group                                      S. Hollenbeck
Request for Comments: 4114                                VeriSign, Inc.
Category: Standards Track                                      June 2005

  E.164 Number Mapping for the Extensible Provisioning Protocol (EPP)

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   This document describes an Extensible Provisioning Protocol (EPP)
   extension mapping for the provisioning and management of E.164
   numbers that represent domain names stored in a shared central
   repository.  Specified in XML, this mapping extends the EPP domain
   name mapping to provide additional features required for the
   provisioning of E.164 numbers.

Hollenbeck                  Standards Track                     [Page 1]



RFC 4114                   EPP E.164 Mapping                   June 2005

Table of Contents

   1. Introduction. . . . . . . . . . . . . . . . . . . . . . . . . .  2
      1.1. Conventions Used in This Document  . . . . . . . . . . . .  3
   2. Object Attributes . . . . . . . . . . . . . . . . . . . . . . .  3
      2.1. E.164 Domain Names . . . . . . . . . . . . . . . . . . . .  3
      2.2. NAPTR Fields . . . . . . . . . . . . . . . . . . . . . . .  3
           2.2.1. Order . . . . . . . . . . . . . . . . . . . . . . .  4
           2.2.2. Preference. . . . . . . . . . . . . . . . . . . . .  4
           2.2.3. Flags . . . . . . . . . . . . . . . . . . . . . . .  4
           2.2.4. Service . . . . . . . . . . . . . . . . . . . . . .  4
           2.2.5. Regular Expression. . . . . . . . . . . . . . . . .  4
           2.2.6. Replacement . . . . . . . . . . . . . . . . . . . .  4
   3. EPP Command Mapping . . . . . . . . . . . . . . . . . . . . . .  4
      3.1. EPP Query Commands . . . . . . . . . . . . . . . . . . . .  5
           3.1.1. EPP <check> Command . . . . . . . . . . . . . . . .  5
           3.1.2. EPP <info> Command. . . . . . . . . . . . . . . . .  5
           3.1.3. EPP <transfer> Command. . . . . . . . . . . . . . .  7
      3.2. EPP Transform Commands . . . . . . . . . . . . . . . . . .  7
           3.2.1. EPP <create> Command. . . . . . . . . . . . . . . .  7
           3.2.2. EPP <delete> Command. . . . . . . . . . . . . . . .  9
           3.2.3. EPP <renew> Command . . . . . . . . . . . . . . . .  9
           3.2.4. EPP <transfer> Command. . . . . . . . . . . . . . .  9
           3.2.5. EPP <update> Command. . . . . . . . . . . . . . . .  9
   4. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . . . 11
   5. Internationalization Considerations . . . . . . . . . . . . . . 14
   6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 14
   7. Security Considerations . . . . . . . . . . . . . . . . . . . . 14
   8. Acknowledgements. . . . . . . . . . . . . . . . . . . . . . . . 15
   9. References. . . . . . . . . . . . . . . . . . . . . . . . . . . 15
      9.1. Normative References . . . . . . . . . . . . . . . . . . . 15
      9.2. Informative References . . . . . . . . . . . . . . . . . . 16

1.  Introduction

   This document describes an E.164 number mapping for version 1.0 of
   the Extensible Provisioning Protocol (EPP).  This mapping, an
   extension of the domain name mapping described in [1], is specified
   using the Extensible Markup Language (XML) 1.0, as described in [2],
   and XML Schema notation, as described in [3] and [4].

   The EPP core protocol specification [5] provides a complete
   description of EPP command and response structures.  A thorough
   understanding of the base protocol specification is necessary to
   understand the mapping described in this document.

Hollenbeck                  Standards Track                     [Page 2]



RFC 4114                   EPP E.164 Mapping                   June 2005

   ENUM [6] describes how the Domain Name System (DNS) can be used to
   identify services associated with an E.164 number.  The EPP mapping
   described in this document specifies a mechanism for the provisioning
   and management of E.164 numbers stored in a shared central
   repository.  Information exchanged via this mapping can be extracted
   from the repository and used to publish DNS resource records as
   described in ENUM [6].  Examples used in this document were chosen
   specifically to illustrate provisioning concepts for the example
   resource records described in the ENUM specification.

1.1.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [7].

   In examples, "C:" represents lines sent by a protocol client, and
   "S:" represents lines returned by a protocol server.  Indentation and
   white space in examples are only provided to illustrate element
   relationships and are not a REQUIRED feature of this specification.

   XML is case sensitive.  Unless stated otherwise, XML specifications
   and examples provided in this document MUST be interpreted in the
   character case presented to develop a conforming implementation.

2.  Object Attributes

   This extension adds elements to the EPP domain name mapping [1].
   Only new element descriptions are described here.

2.1.  E.164 Domain Names

   An E.164 domain name is a representation of an E.164 number that has
   been translated to conform to domain name syntax, as described in the
   ENUM specification [6].  The labels used to describe the name space
   of an E.164 domain name are a policy matter that is beyond the scope
   of this document.

2.2.  NAPTR Fields

   According to ENUM [6], Naming Authority Pointer (NAPTR) resource
   records are used to identify available ways for contacting a specific
   node identified by a domain name created from the translation of an
   E.164 number.  The basic NAPTR record format is described in RFC 3403
   [8].  Rules for structuring and using NAPTR records for use with ENUM
   are described in RFC 3761 [6].

Hollenbeck                  Standards Track                     [Page 3]



RFC 4114                   EPP E.164 Mapping                   June 2005

   Several NAPTR field values are optional per RFC 3403.  RFC 3761
   describes processing rules that require the presence of certain NAPTR
   field values.  This document describes field value requirements that
   correspond to RFC 3761.

2.2.1.  Order

   The NAPTR order field, a 16-bit unsigned integer, is represented in
   this mapping using the XML Schema "unsignedShort" data type.

2.2.2.  Preference

   The NAPTR preference field, a 16-bit unsigned integer, is represented
   in this mapping using the XML Schema "unsignedShort" data type.

2.2.3.  Flags

   The NAPTR flags field is represented in this mapping using a single
   character.  The case of the flag character is not significant.

2.2.4.  Service

   The NAPTR service field is represented in this mapping using a
   character string with an unspecified maximum length.  Valid values
   are application-dependent.

2.2.5.  Regular Expression

   The NAPTR regexp field is represented in this mapping using a
   character string with an unspecified maximum length.  This field can
   contain numerous backslashes and should thus be treated with care.

2.2.6.  Replacement

   The NAPTR replacement field, whose value is a domain name, is
   represented in this mapping using a character string with a maximum
   length of 255 characters.

3.  EPP Command Mapping

   A detailed description of the EPP syntax and semantics can be found
   in the EPP core protocol specification [5].  The command mappings
   described here are specifically for use in implementing ENUM
   provisioning processes via EPP.

Hollenbeck                  Standards Track                     [Page 4]



RFC 4114                   EPP E.164 Mapping                   June 2005

3.1.  EPP Query Commands

   EPP provides three commands to retrieve object information: <check>
   to determine if an object is known to the server, <info> to retrieve
   detailed information associated with an object, and <transfer> to
   retrieve object transfer status information.

3.1.1.  EPP <check> Command

   This extension does not add any elements to the EPP <check> command
   or <check> response described in the EPP domain mapping [1].

3.1.2.  EPP <info> Command

   This extension does not add any elements to the EPP <info> command
   described in the EPP domain mapping [1].  Additional elements are
   defined for the <info> response.

   When an <info> command has been processed successfully, the EPP
   <resData> element MUST contain child elements as described in the EPP
   domain mapping [1].  In addition, the EPP <extension> element MUST
   contain a child <e164:infData> element that identifies the extension
   namespace and the location of the extension schema.  The <e164:
   infData> element contains one or more <e164:naptr> elements that
   contain the following child elements:

   -  An <e164:order> element that contains a NAPTR order value.

   -  An <e164:pref> element that contains a NAPTR preference value.

   -  An OPTIONAL <e164:flags> element that contains a NAPTR flags
      value.

   -  An <e164:svc> element that contains a NAPTR service value.

   -  An OPTIONAL <e164:regex> element that contains a NAPTR regular
      expression value.

   -  An OPTIONAL <e164:replacement> element that contains a NAPTR
      replacement value.

Hollenbeck                  Standards Track                     [Page 5]



RFC 4114                   EPP E.164 Mapping                   June 2005

   Example <info> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   S:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   S:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   S:     epp-1.0.xsd">
   S: <response>
   S:  <result code="1000">
   S:   <msg>Command completed successfully</msg>
   S:  </result>
   S:  <resData>
   S:   <domain:infData
   S:    xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"
   S:    xsi:schemaLocation="urn:ietf:params:xml:ns:domain-1.0
   S:    domain-1.0.xsd">
   S:    <domain:name>3.8.0.0.6.9.2.3.6.1.4.4.e164.arpa</domain:name>
   S:    <domain:roid>EXAMPLE1-REP</domain:roid>
   S:    <domain:status s="ok"/>
   S:    <domain:registrant>jd1234</domain:registrant>
   S:    <domain:contact type="admin">sh8013</domain:contact>
   S:    <domain:contact type="tech">sh8013</domain:contact>
   S:    <domain:ns>
   S:     <domain:hostObj>ns1.example.com</domain:hostObj>
   S:     <domain:hostObj>ns2.example.com</domain:hostObj>
   S:    </domain:ns>
   S:    <domain:host>ns1.example.com</domain:host>
   S:    <domain:host>ns2.example.com</domain:host>
   S:    <domain:clID>ClientX</domain:clID>
   S:    <domain:crID>ClientY</domain:crID>
   S:    <domain:crDate>1999-04-03T22:00:00.0Z</domain:crDate>
   S:    <domain:upID>ClientX</domain:upID>
   S:    <domain:upDate>1999-12-03T09:00:00.0Z</domain:upDate>
   S:    <domain:exDate>2005-04-03T22:00:00.0Z</domain:exDate>
   S:    <domain:trDate>2000-04-08T09:00:00.0Z</domain:trDate>
   S:    <domain:authInfo>
   S:     <domain:pw>2fooBAR</domain:pw>
   S:    </domain:authInfo>
   S:   </domain:infData>
   S:  </resData>
   S:  <extension>
   S:   <e164:infData xmlns:e164="urn:ietf:params:xml:ns:e164epp-1.0"
   S:    xsi:schemaLocation="urn:ietf:params:xml:ns:e164epp-1.0
   S:    e164epp-1.0.xsd">
   S:    <e164:naptr>
   S:     <e164:order>10</e164:order>
   S:     <e164:pref>100</e164:pref>
   S:     <e164:flags>u</e164:flags>

Hollenbeck                  Standards Track                     [Page 6]



RFC 4114                   EPP E.164 Mapping                   June 2005

   S:     <e164:svc>E2U+sip</e164:svc>
   S:     <e164:regex>"!^.*$!sip:info@example.com!"</e164:regex>
   S:    </e164:naptr>
   S:    <e164:naptr>
   S:     <e164:order>10</e164:order>
   S:     <e164:pref>102</e164:pref>
   S:     <e164:flags>u</e164:flags>
   S:     <e164:svc>E2U+msg</e164:svc>
   S:     <e164:regex>"!^.*$!mailto:info@example.com!"</e164:regex>
   S:    </e164:naptr>
   S:   </e164:infData>
   S:  </extension>
   S:  <trID>
   S:   <clTRID>ABC-12345</clTRID>
   S:   <svTRID>54322-XYZ</svTRID>
   S:  </trID>
   S: </response>
   S:</epp>

   An EPP error response MUST be returned if an extended <info> command
   can not be processed for any reason.

3.1.3.  EPP <transfer> Command

   This extension does not add any elements to the EPP <transfer>
   command or <transfer> response described in the EPP domain mapping
   [1].

3.2.  EPP Transform Commands

   EPP provides five commands to transform objects: <create> to create
   an instance of an object, <delete> to delete an instance of an
   object, <renew> to extend the validity period of an object,
   <transfer> to manage object sponsorship changes, and <update> to
   change information associated with an object.

3.2.1.  EPP <create> Command

   This extension defines additional elements for the EPP <create>
   command described in the EPP domain mapping [1].  No additional
   elements are defined for the EPP <create> response.

   The EPP <create> command provides a transform operation that allows a
   client to create a domain object.  In addition to the EPP command
   elements described in the EPP domain mapping [1], the command MUST
   contain an <extension> element.  The <extension> element MUST contain
   a child <e164:create> element that identifies the extension namespace
   and the location of the extension schema.  The <e164:create> element

Hollenbeck                  Standards Track                     [Page 7]



RFC 4114                   EPP E.164 Mapping                   June 2005

   contains one or more <e164:naptr> elements that contain the following
   child elements:

   -  An <e164:order> element that contains a NAPTR order value.

   -  An <e164:pref> element that contains a NAPTR preference value.

   -  An OPTIONAL <e164:flags> element that contains a NAPTR flags
      value.

   -  An <e164:svc> element that contains a NAPTR service value.

   -  An OPTIONAL <e164:regex> element that contains a NAPTR regular
      expression value.

   -  An OPTIONAL <e164:replacement> element that contains a NAPTR
      replacement value.

   Example <create> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   C:     epp-1.0.xsd">
   C: <command>
   C:  <create>
   C:   <domain:create
   C:    xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"
   C:    xsi:schemaLocation="urn:ietf:params:xml:ns:domain-1.0
   C:    domain-1.0.xsd">
   C:     <domain:name>3.8.0.0.6.9.2.3.6.1.4.4.e164.arpa</domain:name>
   C:     <domain:period unit="y">2</domain:period>
   C:     <domain:ns>
   C:      <domain:hostObj>ns1.example.com</domain:hostObj>
   C:      <domain:hostObj>ns2.example.com</domain:hostObj>
   C:     </domain:ns>
   C:     <domain:registrant>jd1234</domain:registrant>
   C:     <domain:contact type="admin">sh8013</domain:contact>
   C:     <domain:contact type="tech">sh8013</domain:contact>
   C:     <domain:authInfo>
   C:      <domain:pw>2fooBAR</domain:pw>
   C:     </domain:authInfo>
   C:   </domain:create>
   C:  </create>
   C:  <extension>
   C:   <e164:create
   C:    xmlns:e164="urn:ietf:params:xml:ns:e164epp-1.0"

Hollenbeck                  Standards Track                     [Page 8]



RFC 4114                   EPP E.164 Mapping                   June 2005

   C:    xsi:schemaLocation="urn:ietf:params:xml:ns:e164epp-1.0
   C:    e164epp-1.0.xsd">
   C:    <e164:naptr>
   C:     <e164:order>10</e164:order>
   C:     <e164:pref>100</e164:pref>
   C:     <e164:flags>u</e164:flags>
   C:     <e164:svc>E2U+sip</e164:svc>
   C:     <e164:regex>"!^.*$!sip:info@example.com!"</e164:regex>
   C:    </e164:naptr>
   C:    <e164:naptr>
   C:     <e164:order>10</e164:order>
   C:     <e164:pref>102</e164:pref>
   C:     <e164:flags>u</e164:flags>
   C:     <e164:svc>E2U+msg</e164:svc>
   C:     <e164:regex>"!^.*$!mailto:info@example.com!"</e164:regex>
   C:    </e164:naptr>
   C:   </e164:create>
   C:  </extension>
   C:  <clTRID>ABC-12345</clTRID>
   C: </command>
   C:</epp>

   When an extended <create> command has been processed successfully,
   the EPP response is as described in the EPP domain mapping [1].

3.2.2.  EPP <delete> Command

   This extension does not add any elements to the EPP <delete> command
   or <delete> response described in the EPP domain mapping [1].

3.2.3.  EPP <renew> Command

   This extension does not add any elements to the EPP <renew> command
   or <renew> response described in the EPP domain mapping [1].

3.2.4.  EPP <transfer> Command

   This extension does not add any elements to the EPP <transfer>
   command or <transfer> response described in the EPP domain mapping
   [1].

3.2.5.  EPP <update> Command

   This extension defines additional elements for the EPP <update>
   command described in the EPP domain mapping [1].  No additional
   elements are defined for the EPP <update> response.

Hollenbeck                  Standards Track                     [Page 9]



RFC 4114                   EPP E.164 Mapping                   June 2005

   The EPP <update> command provides a transform operation that allows a
   client to change the state of a domain object.  In addition to the
   EPP command elements described in the EPP domain mapping [1], the
   <update> command MUST contain an <extension> element.  The
   <extension> element MUST contain a child <e164:update> element that
   identifies the extension namespace and the location of the extension
   schema.  The <e164:update> element contains one or more <e164:add> or
   <e164:rem> elements.  Each <e164:add> and <e164:rem> element contains
   an <e164:naptr> element that contains the following child elements:

   -  An <e164:order> element that contains a NAPTR order value.

   -  An <e164:pref> element that contains a NAPTR preference value.

   -  An OPTIONAL <e164:flags> element that contains a NAPTR flags
      value.

   -  An <e164:svc> element that contains a NAPTR service value.

   -  An OPTIONAL <e164:regex> element that contains a NAPTR regular
      expression value.

   -  An OPTIONAL <e164:replacement> element that contains a NAPTR
      replacement value.

   Example <update> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0"
   C:     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:epp-1.0
   C:     epp-1.0.xsd">
   C: <command>
   C:  <update>
   C:   <domain:update
   C:    xmlns:domain="urn:ietf:params:xml:ns:domain-1.0"
   C:    xsi:schemaLocation="urn:ietf:params:xml:ns:domain-1.0
   C:    domain-1.0.xsd">
   C:    <domain:name>3.8.0.0.6.9.2.3.6.1.4.4.e164.arpa</domain:name>
   C:     </domain:update>
   C:   </update>
   C:   <extension>
   C:    <e164:update xmlns:e164="urn:ietf:params:xml:ns:e164epp-1.0"
   C:     xsi:schemaLocation="urn:ietf:params:xml:ns:e164epp-1.0
   C:     e164epp-1.0.xsd">
   C:     <e164:rem>
   C:      <e164:naptr>
   C:       <e164:order>10</e164:order>

Hollenbeck                  Standards Track                    [Page 10]



RFC 4114                   EPP E.164 Mapping                   June 2005

   C:       <e164:pref>102</e164:pref>
   C:       <e164:flags>u</e164:flags>
   C:       <e164:svc>E2U+msg</e164:svc>
   C:       <e164:regex>"!^.*$!mailto:info@example.com!"</e164:regex>
   C:      </e164:naptr>
   C:     </e164:rem>
   C:    </e164:update>
   C:   </extension>
   C:  <clTRID>ABC-12345</clTRID>
   C: </command>
   C:</epp>

   When an extended <update> command has been processed successfully,
   the EPP response is as described in the EPP domain mapping [1].

4.  Formal Syntax

   An EPP object mapping is specified in XML Schema notation.  The
   formal syntax presented here is a complete schema representation of
   the object mapping suitable for automated validation of EPP XML
   instances.  The BEGIN and END tags are not part of the schema; they
   are used to note the beginning and ending of the schema for URI
   registration purposes.

   BEGIN
   <?xml version="1.0" encoding="UTF-8"?>

   <schema targetNamespace="urn:ietf:params:xml:ns:e164epp-1.0"
           xmlns:e164="urn:ietf:params:xml:ns:e164epp-1.0"
           xmlns="http://www.w3.org/2001/XMLSchema"
           elementFormDefault="qualified">

     <annotation>
       <documentation>
         Extensible Provisioning Protocol v1.0
         domain name extension schema for E.164 number provisioning.
       </documentation>
     </annotation>

   <!--
   Child elements found in EPP commands.
   -->
     <element name="create" type="e164:createType"/>
     <element name="update" type="e164:updateType"/>

Hollenbeck                  Standards Track                    [Page 11]



RFC 4114                   EPP E.164 Mapping                   June 2005

   <!--
   Global elements.
   -->
     <element name="naptr" type="e164:naptrType"/>

   <!--
   Child elements of the <create> command.
   -->
     <complexType name="createType">
       <sequence>
         <element ref="e164:naptr" maxOccurs="unbounded"/>
       </sequence>
     </complexType>

     <complexType name="naptrType">
       <sequence>
         <element name="order" type="unsignedShort"/>
         <element name="pref" type="unsignedShort"/>
         <element name="flags" type="e164:flagsType"
          minOccurs="0"/>
         <element name="svc" type="e164:svcType"/>
         <element name="regex" type="e164:regexType"
          minOccurs="0"/>
         <element name="repl" type="e164:replType"
          minOccurs="0"/>
       </sequence>
     </complexType>

     <simpleType name="flagsType">
       <restriction base="token">
         <pattern value="[A-Z]|[a-z]|[0-9]"/>
         <length value="1"/>
       </restriction>
     </simpleType>

     <simpleType name="svcType">
       <restriction base="token">
         <minLength value="1"/>
       </restriction>
     </simpleType>

     <simpleType name="regexType">
       <restriction base="token">
         <minLength value="1"/>
       </restriction>
     </simpleType>

Hollenbeck                  Standards Track                    [Page 12]



RFC 4114                   EPP E.164 Mapping                   June 2005

     <simpleType name="replType">
       <restriction base="token">
         <minLength value="1"/>
         <maxLength value="255"/>
       </restriction>
     </simpleType>

   <!--
   Child elements of the <update> command.
   -->
     <complexType name="updateType">
       <sequence>
         <element name="add" type="e164:addRemType"
          minOccurs="0"/>
         <element name="rem" type="e164:addRemType"
          minOccurs="0"/>
       </sequence>
     </complexType>

   <!--
   Data elements that can be added or removed.
   -->
     <complexType name="addRemType">
       <sequence>
         <element ref="e164:naptr" maxOccurs="unbounded"/>
       </sequence>
     </complexType>

   <!--
   Child response elements.
   -->
     <element name="infData" type="e164:infDataType"/>

   <!--
   <info> response elements.
   -->
     <complexType name="infDataType">
       <sequence>
         <element ref="e164:naptr" maxOccurs="unbounded"/>
       </sequence>
     </complexType>

   <!--
   End of schema.
   -->
   </schema>
   END

Hollenbeck                  Standards Track                    [Page 13]



RFC 4114                   EPP E.164 Mapping                   June 2005

5.  Internationalization Considerations

   EPP is represented in XML, which provides native support for encoding
   information using the Unicode character set and its more compact
   representations, including UTF-8 [10].  Conformant XML processors
   recognize both UTF-8 and UTF-16 [11].  Though XML includes provisions
   to identify and use other character encodings through use of an
   "encoding" attribute in an <?xml?> declaration, use of UTF-8 is
   RECOMMENDED in environments where parser encoding support
   incompatibility exists.

   As an extension of the EPP domain mapping [1], the elements, element
   content, attributes, and attribute values described in this document
   MUST inherit the internationalization conventions used to represent
   higher-layer domain and core protocol structures present in an XML
   instance that includes this extension.

6.  IANA Considerations

   This document uses URNs to describe XML namespaces and XML schemas
   conforming to a registry mechanism described in RFC 3688 [9].  Two
   URI assignments have been completed by the IANA:

   Registration for the extension namespace:

      URI: urn:ietf:params:xml:ns:e164epp-1.0

      Registrant Contact: IESG

      XML: None.  Namespace URIs do not represent an XML specification.

   Registration for the extension XML schema:

      URI: urn:ietf:params:xml:schema:e164epp-1.0

      Registrant Contact: IESG

      XML: See the "Formal Syntax" section of this document.

7.  Security Considerations

   The mapping extensions described in this document do not provide any
   security services beyond those described by EPP [5], the EPP domain
   name mapping [1], and protocol layers used by EPP.  Security
   considerations related to ENUM are described in the "Security
   Considerations" section of the ENUM specification [6]; security
   considerations related to the Dynamic Delegation Discovery System and
   NAPTR records are described in the "Security Considerations" section

Hollenbeck                  Standards Track                    [Page 14]



RFC 4114                   EPP E.164 Mapping                   June 2005

   of RFC 3403 [8].  The security considerations described in these
   specifications apply to this specification as well.

   As with other domain object transforms, the EPP transform operations
   described in this document MUST be restricted to the sponsoring
   client as authenticated using the mechanisms described in sections
   2.9.1.1 and 7 of RFC 3730 [5].  Any attempt to perform a transform
   operation on a domain object by any client other than the sponsoring
   client MUST be rejected with an appropriate EPP authorization error.

8.  Acknowledgements

   The author would like to thank the following people who have provided
   significant contributions to the development of this document:

   Lawrence Conroy, Edward Lewis, Michael Mealling, Allison Mankin, Chip
   Sharp, and James Yu.

9.  References

9.1.  Normative References

   [1]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP) Domain
        Name Mapping", RFC 3731, March 2004.

   [2]  Paoli, J., Sperberg-McQueen, C., Bray, T., and E. Maler,
        "Extensible Markup Language (XML) 1.0 (Second Edition)", W3C
        FirstEdition REC-xml-20001006, October 2000.

   [3]  Maloney, M., Beech, D., Mendelsohn, N., and H. Thompson, "XML
        Schema Part 1: Structures", W3C REC REC-xmlschema-1-20010502,
        May 2001.

   [4]  Malhotra, A. and P. Biron, "XML Schema Part 2: Datatypes", W3C
        REC REC-xmlschema-2-20010502, May 2001.

   [5]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)", RFC
        3730, March 2004.

   [6]  Faltstrom, P. and M. Mealling, "The E.164 to Uniform Resource
        Identifiers (URI) Dynamic Delegation Discovery System (DDDS)
        Application (ENUM)", RFC 3761, April 2004.

   [7]  Bradner, S., "Key words for use in RFCs to Indicate Requirement
        Levels", BCP 14, RFC 2119, March 1997.

Hollenbeck                  Standards Track                    [Page 15]



RFC 4114                   EPP E.164 Mapping                   June 2005

   [8]  Mealling, M., "Dynamic Delegation Discovery System (DDDS) Part
        Three: The Domain Name System (DNS) Database", RFC 3403, October
        2002.

   [9]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688, January
        2004.

9.2.  Informative References

   [10]  Yergeau, F., "UTF-8, a transformation format of ISO 10646", STD
         63, RFC 3629, November 2003.

   [11]  Hoffman, P. and F. Yergeau, "UTF-16, an encoding of ISO 10646",
         RFC 2781, February 2000.

Author's Address

   Scott Hollenbeck
   VeriSign, Inc.
   21345 Ridgetop Circle
   Dulles, VA  20166-6503
   US

   EMail: shollenbeck@verisign.com

Hollenbeck                  Standards Track                    [Page 16]



RFC 4114                   EPP E.164 Mapping                   June 2005

Full Copyright Statement

   Copyright (C) The Internet Society (2005).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.

Hollenbeck                  Standards Track                    [Page 17]